百能 百能
Focus on global challenges and pressures, provide competitive energy and environmental solutions and services, and continuously create maximum value for customers.
Project Background
This EPC project provides flue-gas desulfurization, denitrification and auxiliary equipment for the 6 × 50 MW waste-heat power generation facilities supporting Hoshine (Shanshan) Energy Management Co., Ltd.'s Phase II 400,000-tonne industrial-silicon project. The development has 32 industrial-silicon furnaces rated at 33,000 kVA each. Every four furnaces share one treatment train, giving eight denitrification reactors and eight desulfurization towers. Each train is designed for 915,000 Nm³/h of wet flue gas at standard conditions. Separate buildings house reducing-agent preparation and desulfurization-agent preparation, gypsum processing and desulfurization-wastewater treatment.
Flue Gas Desulfurization, Denitrification and Auxiliary Equipment EPC for the 6 × 50 MW Waste Heat Power Generation Project Supporting Hoshine (Shanshan) Energy Management’s Phase II 400,000-Tonne Industrial Silicon Project

Technical Characteristics

The project treats flue gas from the world's largest industrial-silicon base using pyneo's independently developed, patented high-efficiency denitrification and desulfurization technology, which received the Zhejiang Patent Gold Award. It addresses the unsuitable flue-gas temperature for conventional SNCR/SCR and the fine, sticky dust that readily blocks denitrification catalysts. The integrated technology and equipment provide stable commercial operation and adapt to the operating loads of the silicon furnaces.

Solution

Flue gas passes from the silicon-furnace bag filters through collecting ducts, booster fans, denitrification reactors, desulfurization absorbers and high-efficiency demisters before direct stack discharge. Prepared reducing agent is supplied to the denitrification reactors; prepared desulfurization agent is supplied to the absorbers. Gypsum slurry is dewatered by hydrocyclones and belt filters to produce filter cake for off-site transport. Desulfurization wastewater is treated before discharge.

Flue Gas Desulfurization, Denitrification and Auxiliary Equipment EPC for the 6 × 50 MW Waste Heat Power Generation Project Supporting Hoshine (Shanshan) Energy Management’s Phase II 400,000-Tonne Industrial Silicon Project

Flue Gas Desulfurization, Denitrification and Auxiliary Equipment EPC for the 6 × 50 MW Waste Heat Power Generation Project Supporting Hoshine (Shanshan) Energy Management’s Phase II 400,000-Tonne Industrial Silicon Project

Flue Gas Desulfurization, Denitrification and Auxiliary Equipment EPC for the 6 × 50 MW Waste Heat Power Generation Project Supporting Hoshine (Shanshan) Energy Management’s Phase II 400,000-Tonne Industrial Silicon Project

Flue Gas Desulfurization, Denitrification and Auxiliary Equipment EPC for the 6 × 50 MW Waste Heat Power Generation Project Supporting Hoshine (Shanshan) Energy Management’s Phase II 400,000-Tonne Industrial Silicon Project

Get The Effect

The system treats approximately 7.32 million Nm³/h of flue gas from 32 furnaces rated at 33,000 kVA. Design emissions outperform ultra-low-emission requirements: SO₂ ≤25 mg/Nm³, dust ≤10 mg/Nm³ and NOx ≤30 mg/Nm³. Hourly removal is 3.66 tonnes of NOx and 1.45 tonnes of SO₂, reducing annual atmospheric emissions by approximately 29,000 tonnes of NOx and 11,600 tonnes of SO₂.
Copyright © 2026 Pyneo Co.,Ltd. All Rights Reserved. 浙ICP备20004608号-2 Sitemap