Focus on global challenges and pressures, provide competitive energy and environmental solutions and services, and continuously create maximum value for customers.
Project Background
Two dedicated alkali-recovery incineration systems are installed to treat upstream concentrate with 50–70% solids. Each furnace treats 10 t/h. High-temperature incineration destroys organics in the concentrated waste liquid and recovers energy as superheated steam at 9.8 MPa(g) and 330°C, turning waste into a resource.
Technical Characteristics
Self-sustaining operation uses the concentrate's high calorific value as the main fuel, with natural gas for auxiliary firing, startup and shutdown. Rated steam output per furnace is at least 40 t/h. The operating range is 30–120%, accommodating production fluctuations. Feedwater temperatures of either 190°C or 260°C are accommodated by adjusting natural-gas consumption while maintaining rated steam output.
Solution
A pre-combustion chamber and low-NOx burners ensure complete destruction of organics, with specific organic pollutants and non-methane hydrocarbons meeting GB 31571-2015 and Beijing local standard DB11/447-2015.
Flue gas is treated by a bag filter using PTFE bags with PTFE membranes, followed by SNCR denitrification and stack CEMS monitoring. Outlet dust is guaranteed at ≤5 mg/Nm³.
Project-specific requirements and both cited standards apply simultaneously. Guaranteed limits are particulate matter ≤5 mg/Nm³, NOx ≤35 mg/Nm³, SO₂ ≤35 mg/Nm³, non-methane hydrocarbons (VOCs) ≤20 mg/Nm³ and dioxins ≤0.1 ng-TEQ/Nm³, supporting first-pass environmental acceptance.

Get The Effect
Per-furnace capacity is 10 t/h of concentrate at 50–70% solids. Design operating range is 30–120%. Steam output is at least 40 t/h at 9.8 MPa(g) and 330°C. Guaranteed boiler efficiency on a lower-heating-value basis is at least 83.8%.


To be the most satisfactory energy and environment company in the world
